If you’re new to car detailing, it can be overwhelming to know where to start. But with the right car detailing Melbourne service, products, and techniques, you can achieve professional-grade results without having to pay for expensive detailing services.

Here is a step-by-step guide for DIY car detailing :

1. Gather your tools and supplies: Before you begin detailing your car, make sure you have all the necessary tools and supplies on hand. This includes a high-quality car wash soap, a wash mitt or sponge, a bucket and a hose, a microfiber towel, a clay bar and lubricant, a car wax or sealant, and a tire shine product.
2. Prep your car: Before you begin detailing your car, make sure it’s clean and dry. Rinse off any loose dirt and debris, and then use a microfiber towel to dry the surface. This will ensure that the detailing products you use can properly bond to the surface and provide the maximum level of protection.
3. Wash your car: The first step in the detailing process is to wash your car. This will remove any loose dirt, grime, and debris from the surface of your vehicle, allowing you to see exactly what you’re working with. To wash your car, follow these steps:

• Begin by rinsing your car with a hose to remove any loose dirt and debris. Be sure to rinse the wheels and tires as well.
• Next, fill a bucket with warm water and add a few drops of car wash soap. Dip your wash mitt or sponge into the bucket, and then gently wash the surface of your car, starting at the top and working your way down. Be sure to rinse your wash mitt or sponge frequently to prevent it from becoming dirty and abrasive.
• After you’ve washed the entire car, rinse it thoroughly with a hose to remove any remaining soap suds.
• If you have a pressure washer, you can use it to rinse your car instead of a hose. Just be sure to use the correct nozzle and settings, as using too much pressure can damage the paint.
• Once your car is clean and rinsed, use a microfiber towel to dry it off. Be sure to use a separate towel for each part of the car (e.g., one for the body, one for the windows, etc.) to prevent cross-contamination.

4. Clay your car: After your car is clean, the next step is to clay it. Detailing clay is a soft, pliable substance that helps to remove embedded contaminants from the surface of your car, such as tree sap, road grime, and brake dust. To clay your car, follow these steps:

• Begin by spraying a detailing clay lubricant onto the surface of your car. This will help to lubricate the clay and prevent it from sticking or damaging the paint.
• Next, take a small piece of detailing clay and knead it until it’s soft and pliable. Then, gently glide the clay across the surface of your car, using a back and forth motion. Be sure to work in small sections and to rinse and re-lubricate the clay frequently.
• After you’ve clayed the entire car, use a microfiber towel to remove any remaining lubricant and clay residue.